Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Convergence issue when simulating harmonic propagation with assemblies (3D)
Posted 14 mag 2012, 16:34 GMT-4 RF & Microwave Engineering, Geometry 0 Replies
Please login with a confirmed email address before reporting spam
I want to model harmonic propagation through a 3D multilayer. We use the rf module of comsol 3.5. We enclose the geometry, which is essentially a quarter of an inverted square-based pyramid, with PML at the top, and use perfect magnetic and electric conductor on each pair of parallel side boundaries. As we make the wave to enter through an inner boundary we create a pair and thus, we use assemblies for that. The problem is the slow convergence, in case it happens to converge. We follow the instructions of the rf user guide regarding copying the meshes at each side of the pair in order to avoid using the Vanka preconditioner. We checked the rest of the model by removing the top PML and making the wave to enter through the top boundary, and the model is solved within a decent period of time. Can you help me with some tips to speed up convergence in case we use assemblies?
Thanks a lot.
Hello Marcos Soldera
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.