Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Coil modeling: question about electric field
Posted 18 giu 2012, 03:04 GMT-4 Modeling Tools & Definitions, Parameters, Variables, & Functions Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I have some problem with multi-turn coil modeling. I use 2d axisymmetric geometry. My model is something like this www.comsol.com/support/knowledgebase/916/ Current distribution is calculated correctly. But my real coil is made of a single wire (coiled in a spiral). And so between cross-sections of wire there is a potential difference. And so there is non-zero Oz component of electric field. In example model there is no Ez component (I suppose this is because 2d axisymmetric coil consists of many separate coils and it isn't influence on magnetic field). But in my model (it has different geometry but i hope that problem is clear) this electric field has a great influence. How can I take it into acoount (in 2d axisymmetric)?
Thank you for your attention!
Hello Vladimir Parfenyev
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.