Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
how to define a variable in livelink with matlab which changes in a loop?
Posted 25 lug 2012, 07:10 GMT-4 Interfacing, Geometry Version 4.2a 2 Replies
Please login with a confirmed email address before reporting spam
hi, I have a problem to define a loop in livelink. In the loop geometries with different shapes are created. The problem is how to define a parameter varies in loop? The .m file is attached below. Thanks!
Attachments:
2 Replies Last Post 8 ago 2012, 10:27 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
on line 31, you have:
" i = 2:1"
This should be
"i = 1:2"
that will give i = [1 2]
I can't run your code from the console I'm at, but I'm pretty sure that's your problem.
" i = 2:1"
This should be
"i = 1:2"
that will give i = [1 2]
I can't run your code from the console I'm at, but I'm pretty sure that's your problem.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
thanks!