Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Which Comsol model should be used?

Please login with a confirmed email address before reporting spam

Hello, everyone,
I am a very new user of comsol multiphysics of v4.3
I want to find out if there is any model which can simulate how cement is displaced in horizontal wellbore.

Many thanks for your help. Waiting in much expectancy.

Titus

2 Replies Last Post 7 ago 2012, 23:43 GMT-4
Nagi Elabbasi Facebook Reality Labs

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 ago 2012, 14:01 GMT-4
Hi Titus,

Depending on which material model you intend to use for the cement it could be either the Structural Mechanics Module or the Geomechanics Module. The more accurate materials for cement are in the Geomechanics one. Check under Soil Plasticity or Rock material models.

Nagi Elabbasi
Veryst Engineering
Hi Titus, Depending on which material model you intend to use for the cement it could be either the Structural Mechanics Module or the Geomechanics Module. The more accurate materials for cement are in the Geomechanics one. Check under Soil Plasticity or Rock material models. Nagi Elabbasi Veryst Engineering

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 ago 2012, 23:43 GMT-4
Hi Nagi
Thanks for the direction. I'll check on that and let you know the outcome.
Once again, thanks

Titus
Hi Nagi Thanks for the direction. I'll check on that and let you know the outcome. Once again, thanks Titus

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.