Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
come across such a problem
Posted 25 ago 2012, 22:49 GMT-4 Parameters, Variables, & Functions Version 4.2a 3 Replies
Please login with a confirmed email address before reporting spam
undifined value in the stiffness matrix. I make sure that I have already defined all the dependent variables, but the software
point out that
"Undefined value found in the stiffness matrix.
There are 2001 equations giving NaN/Inf in the matrix rowsfor the variable mod1.ne at coordinates : (0), (5e-7), (1e-
006), (1.5e-006), (2e-006), …
There are 2001 equations giving NaN/Inf in the matrix rowsfor the variable mod1.ni at coordinates : (0), (5e-7), (1e-
006), (1.5e-006), (2e-006), …
and similarly for the degrees of freedom, NaN/Inf in the matrix columns. "
The mod1.ne and mod1.ni are the dependent variables. I don't understand the NaN/Inf and don't have any thought of
the problem I came across. Much thanks for your help!
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
Yours is too general a question.
If you do a search in this forum for "undefined value", you will find more than 50 entries. Perhaps first just look at those to understand where you might have gone wrong.
Or alternatively, try posting your mph, to see if you get help.
Suresh
Please login with a confirmed email address before reporting spam
Thanks a lot for your help! I was just confused of that for the solution.
Best regards,
venus