Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Drag Force on Moving Sphere with Slip
Posted 7 set 2012, 17:49 GMT-4 Fluid & Heat Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
sphere is much lower than that of the fluid in the channel. I wanted to use the Creeping Flow module as I did for the hard sphere case, with the spheres having a Slip boundary condition, but there is no way to have one
sphere translating while also having a slip boundary condition. Setting the b.c. to Slip Velocity gives me a drag result that is only ~10% less than the no-slip case, which is not correct according to the theory. Could
you please advise me what approach to take to model droplets in fluid as perfect slip?
Hello Thomas Leary
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.