Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Eigenfrequency of Piezoelectric shunts
Posted 28 mag 2013, 14:39 GMT-4 Low-Frequency Electromagnetics, Structural Mechanics Version 4.3 1 Reply
Please login with a confirmed email address before reporting spam
Hi, everyone
Recently, I try to utilize the coupling modules (Piezoelectric Device+ Electrical Circuit ) to evaluate the eigenfrequency of piezoelectric shunting system. However, I come across some difficulties. I find the Electrical Module doesn't support eigenfrequency calculation (it only supports stationary, frequency domain and time dependent). Are there anyone can help me solve this problem? The sketch map of the piezoelectric shunting system is attached.
Thank you.
Recently, I try to utilize the coupling modules (Piezoelectric Device+ Electrical Circuit ) to evaluate the eigenfrequency of piezoelectric shunting system. However, I come across some difficulties. I find the Electrical Module doesn't support eigenfrequency calculation (it only supports stationary, frequency domain and time dependent). Are there anyone can help me solve this problem? The sketch map of the piezoelectric shunting system is attached.
Thank you.
Attachments:
1 Reply Last Post 31 mag 2013, 07:11 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
you can run a frequency domain study around an estimate of the resonance frequency of your setup.
Cheers
Edgar
--
Edgar J. Kaiser
www.emphys.com