Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Defining the outflow boundary condition for PDE interface
Posted 3 giu 2013, 05:22 GMT-4 Parameters, Variables, & Functions Version 4.3a 0 Replies
Please login with a confirmed email address before reporting spam
I am modeling species flow and transport in fracture-matrix system. Fracture is a thin space on left-side with connected matrix on the right-side. Dissolved species in water enter at inlet of the fracture (bottom left of the domains) and are advected through fracture in the upward direction. At the fracture-matrix interface the species diffuse into the matrix.
There are no-flux conditions at all other boundaries except for inlet and outlet of the fracture. At inlet of the fracture I have applied Dirichlet Boundary Condition(specifying the fixed species concentration). I want to implement the outflow boundary condition at top of the fracture with the objective that the species can leave there due to convection and diffusion processes.
Can you help me how to implement the outflow boundary condition at outlet of the fracture.
Best Regards,
Nawaz Ahmad
PhD student ,KTH, Stockholm
Hello Nawaz Ahmad
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.