Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Waveguide spot size converter
Posted 22 lug 2013, 17:11 GMT-4 RF & Microwave Engineering, Wave Optics, Mesh Version 4.3b 1 Reply
Please login with a confirmed email address before reporting spam
Hi,
I am trying to setup a 3d model, using the Wave Optics Beam Envelopes Method, for simulating fiber to chip coupling using a waveguide spot size converter. The waveguide is only tapered in the lateral direction. The operation wavelength is 850nm.
I have problems meshing the structure - I first create a free triangular mesh on the waveguide facet end facet and sweep that along the waveguide axis, but when do the same for the cladding I get the error "Unsupported topology of linking face".
If anyone has a working Comsol model for a spot size converter and is be willing to share it, I would be grateful.
Any input on the meshing issue is also appreciated.
All the best,
Ulrich
I am trying to setup a 3d model, using the Wave Optics Beam Envelopes Method, for simulating fiber to chip coupling using a waveguide spot size converter. The waveguide is only tapered in the lateral direction. The operation wavelength is 850nm.
I have problems meshing the structure - I first create a free triangular mesh on the waveguide facet end facet and sweep that along the waveguide axis, but when do the same for the cladding I get the error "Unsupported topology of linking face".
If anyone has a working Comsol model for a spot size converter and is be willing to share it, I would be grateful.
Any input on the meshing issue is also appreciated.
All the best,
Ulrich
1 Reply Last Post 19 ago 2013, 13:15 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Exactly same problem here! Help welcome...