Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergence error

Posted 11 mar 2014, 14:17 GMT-4 Structural Mechanics Version 4.2, Version 4.3 1 Reply

Veda Sandeep Nagaraja
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am repeatedly getting an error that the solution is not converging. This is more prominent near the resonant frequency. Can you help me? I am using solid mechanics and conducting frequency domain analysis.
1 Reply Last Post 12 mar 2014, 12:34 GMT-4
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 12 mar 2014, 12:34 GMT-4
Hi,

Since you have the problem around the resonant frequencies, a probable cause is that you have too low damping, so that the response is extremely large.

Regards,
Henrik
Hi, Since you have the problem around the resonant frequencies, a probable cause is that you have too low damping, so that the response is extremely large. Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content