Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Clarification of expression : (acos(tpf.intnormr)) [Capillary filling]
Posted 18 mar 2014, 08:59 GMT-4 Microfluidics Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
i'm planning to model the capillary filling of different geometries. As introduction i've been studying the example from comsol : microfluidics module --> Two-Phase-Flow --> Capillary filling ls
under definitions/variables 1a there is the expression for theta : (acos(tpf.intnormr))[1/deg]
Can anyone explain to me how this expression is set up ?
cause 1 : i can't find the theta anywhere else in the model (the contact angle is later on defined as 3/8*pi rad)
and 2: if i try to use this expression in my own model it won't accept it.
hope you can help me out.
regards,
Remco
Hello Remco Vos
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
'intnormr' is defined in 'Filling of a Capillary Channel—Phase Field' example. Look for it in documentation.
It looks like that:
Name Expression Unit Description
intnormr d(phipf,r)/sqrt(d(phipf,r)^2+d(phipf,z)^2+eps) Interface normal, r component
theta (acos(intnormr))[1/deg] rad Contact angle