Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
3D Sheet Folding around a Cylinder
Posted 13 mag 2014, 13:42 GMT-4 Version 4.4 1 Reply
Please login with a confirmed email address before reporting spam
Hello,
I would like to make a 3D simulation of a thin film folding around a solid cylinder. I attached a picture of what my geometry would look like at the beginning. At the end, I want to be able to make the sheet conform to the cylinder. However, I am not sure what is the best physics model to do that. Should I use Solid Mechanics and apply a uniform force on the sheet? If so, what would my boundary conditions be? Or should I go with a surface tension model?
Thank you for your help and your time.
Julien
I would like to make a 3D simulation of a thin film folding around a solid cylinder. I attached a picture of what my geometry would look like at the beginning. At the end, I want to be able to make the sheet conform to the cylinder. However, I am not sure what is the best physics model to do that. Should I use Solid Mechanics and apply a uniform force on the sheet? If so, what would my boundary conditions be? Or should I go with a surface tension model?
Thank you for your help and your time.
Julien
Attachments:
1 Reply Last Post 23 mag 2014, 18:09 GMT-4
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Nobody has an idea how I could that?
Or maybe, is it possible to easily bend a given geometry around a defined axis?
Thank you.
Or maybe, is it possible to easily bend a given geometry around a defined axis?
Thank you.