Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Inconsistency of the weak term units ?!

Please login with a confirmed email address before reporting spam

My weak term for a boundary application mode does not have a right unit (red brackets if i write it in the scalar expressions):

test(phix)*1/R*phix + test(phi)*Jb

Should I always ignore the units of the weak terms?


From the starting equation

nabla Gamma = F , unit[Gamma] = A/m , unit[F] = A/m^2

follows unit[Gamma] is not equal unit[F] and

unit[ test(phix)*1/R*phix] is not equal unit[ test(phi)*Jb] ???

=> It is not possible to have a right unit for the weak term !??


Or should i use the unit 1 for the weak term:

test(phix/1[V/m])*1/R*phix/1[A/m] + test(phi/1[V])*Jb/1[A/m^2]

Maybe I have still an error in my weak term?
I do not like the inconsistency of the units...


Edit:

The unit of the weak term example

Ds*(-test(csTx)*csTx-test(csTy)*csTy)+test(cs)*(react_surf-cst)

in the "Transport and Adsorption" model is also not ok.


3 Replies Last Post 8 apr 2010, 01:55 GMT-4

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 apr 2010, 03:49 GMT-4
I'm not sure if it will help you, but this is a quote from Tubular reactor model:

Because Tc is the dependent variable of a PDE application mode, it does not have an associated unit. Therefore, if the Highlight unexpected units check box is selected in your modeling session, the Unit label for the q0 edit field appears in red. Provided you specify the boundary condition for Tc using the chosen base unit system (specified under Physics>Model Settings; the default choice is SI), you can safely ignore this warning.
I'm not sure if it will help you, but this is a quote from Tubular reactor model: [quote]Because Tc is the dependent variable of a PDE application mode, it does not have an associated unit. Therefore, if the Highlight unexpected units check box is selected in your modeling session, the Unit label for the q0 edit field appears in red. Provided you specify the boundary condition for Tc using the chosen base unit system (specified under Physics>Model Settings; the default choice is SI), you can safely ignore this warning.[/quote]

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 apr 2010, 09:28 GMT-4
Hi

in V3.5a the units are not fully ported all over, i.e. integration coupling variables are not ported with units, probably the test functions neither, I hadnt really realised.

I like the units feature as it helps a lot for the debugging, but a red unit warning remains a warning and might be fully "legal" specially if you use items such as integration coupling variables, and now I should add test functions

have fun Comsoling
Ivar
Hi in V3.5a the units are not fully ported all over, i.e. integration coupling variables are not ported with units, probably the test functions neither, I hadnt really realised. I like the units feature as it helps a lot for the debugging, but a red unit warning remains a warning and might be fully "legal" specially if you use items such as integration coupling variables, and now I should add test functions have fun Comsoling Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 apr 2010, 01:55 GMT-4
Ok. Thank you for your replies!
Ok. Thank you for your replies!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.