Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Bidirectional coupling of "Conductive media DC" with " Heat Transfer by conduction"

Posted 5 lug 2014, 19:11 GMT-4 Low-Frequency Electromagnetics, Heat Transfer & Phase Change 7 Replies

Soumitra Biswas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi

I am coupling "conductive media dc" to "heat transfer with conduction" to see the effect of electrical conductivity due to thermal heating and vice versa.

In the "heat transfer with conduction" mode, I have used the resistive heating "Q_dc" as Heat source value.
My question is that, for bidirectional coupling, should I use any related value of heat transfer to the current source tab in "conductive media dc" mode. Here, I am using the anisotropic conductivity.

For seeing the heat transfer effect on anisotropic conductivity, should there be any temperature dependent formula be used or the formula is already integrated in the software and it will calculate the change of conductivity automatically.

Could you anyone please let me know the answer. If there is any ambiguity in understanding the question, please let me know.


Thanks







7 Replies Last Post 17 lug 2014, 03:29 GMT-4
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 lug 2014, 10:20 GMT-4
Are you using conductivity 'from material' or 'user defined'? In the first case you have to check if the material property is given temperature dependent. In the later case you have to specify the temperature dependency yourself anyway.
Are you using conductivity 'from material' or 'user defined'? In the first case you have to check if the material property is given temperature dependent. In the later case you have to specify the temperature dependency yourself anyway.
Soumitra Biswas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 lug 2014, 10:45 GMT-4
I am using "user defined" conductivity and it is temperature dependent.
I am using "user defined" conductivity and it is temperature dependent.
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 lug 2014, 02:42 GMT-4
So you already have a temperature dependent expression for the temperature dependent material properties? That should be enough right? Or is there an other problem?
So you already have a temperature dependent expression for the temperature dependent material properties? That should be enough right? Or is there an other problem?
Soumitra Biswas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 8 lug 2014, 12:04 GMT-4
Hi

I have a temperature dependent expression for my material. But the problem is that, now I want to see the temperature vs conductivity graph. I mean, how the conductivity varies with increasing temperature. But I can't figure out how to get this graph. Because, ultimately, this will be my output.


Thanks
Hi I have a temperature dependent expression for my material. But the problem is that, now I want to see the temperature vs conductivity graph. I mean, how the conductivity varies with increasing temperature. But I can't figure out how to get this graph. Because, ultimately, this will be my output. Thanks
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 9 lug 2014, 04:06 GMT-4
Can you maybe upload your model? Maybe that will help me better understand you.
Can you maybe upload your model? Maybe that will help me better understand you.
Soumitra Biswas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 16 lug 2014, 16:34 GMT-4
Hi

I couldn't attache the .fl file. Here, I attached the model file.

Could you please get any idea from model file. If you have any problem in understanding, please let me know.


Thanks
Hi I couldn't attache the .fl file. Here, I attached the model file. Could you please get any idea from model file. If you have any problem in understanding, please let me know. Thanks

Attachments:

Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 17 lug 2014, 03:29 GMT-4
Oh sorry I do not know about FEMLAB or Matlab livelink.
Oh sorry I do not know about FEMLAB or Matlab livelink.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content