Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

MEMS micromirror oszillation air damping

Posted 21 lug 2014, 10:40 GMT-4 MEMS & Nanotechnology, MEMS & Piezoelectric Devices Version 4.4 3 Replies

Martin Günter
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,
I want to do a timedependent simulation of a micromirror with piezoelecric actuators. The actuators are stimulated with different voltages and the behaviour of the micromirror over the time are simulated.
My question is: How can I pay attention o the air damping of the surrounding air? Do I have to put a sphere of air around my modell? Or is there a better way because I don't want to simulate the behaving of the air. I only want that the air damping of the oszillating mirror is noticed in the simlation.

Thank you :)
3 Replies Last Post 30 lug 2014, 11:12 GMT-4
Pieter Westerik
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 25 lug 2014, 06:41 GMT-4
If you want to do it completely correctly you have to simulate the complete behaviour of the air as well. However for certain geometries, fluid properties and frequencies you can put all kinds of simplifications. For example if you have two parallel plates, one fixed, the other moving, close to each other (but at least a few free path lengths away from each other) you can use a squeeze film damping boundary condition instead of simulating the complete behaviour of the air between the plates. The gap should be small compared to the size of the plates by the way.
If you want to do it completely correctly you have to simulate the complete behaviour of the air as well. However for certain geometries, fluid properties and frequencies you can put all kinds of simplifications. For example if you have two parallel plates, one fixed, the other moving, close to each other (but at least a few free path lengths away from each other) you can use a squeeze film damping boundary condition instead of simulating the complete behaviour of the air between the plates. The gap should be small compared to the size of the plates by the way.
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 28 lug 2014, 11:44 GMT-4
Hi Martin,

I agree with Pieter. In some cases you need to explicitly model the gas/air and in others you can make some simplifying assumptions, such as the squeeze film damping boundary. Check out this webinar for a MEMS example where we explicitly modeled the surrounding air www.comsol.com/video/simulating-fluid-structure-interaction-comsol-multiphysics. Also, check out Model #1432 in the COMSOL Model Gallery for an example on how to account for the gas damping without explicitly modeling it.

Nagi Elabbasi
Veryst Engineering
Hi Martin, I agree with Pieter. In some cases you need to explicitly model the gas/air and in others you can make some simplifying assumptions, such as the squeeze film damping boundary. Check out this webinar for a MEMS example where we explicitly modeled the surrounding air http://www.comsol.com/video/simulating-fluid-structure-interaction-comsol-multiphysics. Also, check out Model #1432 in the COMSOL Model Gallery for an example on how to account for the gas damping without explicitly modeling it. Nagi Elabbasi Veryst Engineering
Martin Günter
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 30 lug 2014, 11:12 GMT-4
Thank you very much.
Thank you very much.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content