Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

COMSOL Validation for External Flow

Posted 14 ago 2014, 14:16 GMT-4 Fluid & Heat, Computational Fluid Dynamics (CFD), Results & Visualization Version 4.4 1 Reply

Connor Campbell
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello all,

Does anyone have any good references or published results for validation of COMSOL in an open/external flow model? I've worked through quite a few of the tutorials and some simple flow models of my own.

Many of the tutorials provide *very* little detail or explanation of why the obtained solution is an accurate prediction. Additionally, quite a few of the models I have run through (pipe flow, flow over an immersed body, etc.) do not satisfy conservation of mass or conservation of energy. I've been trying to stick to the default solvers and meshes.

Is there a good resource out there that shows COMSOL results for external flow being validated and compared to analytical or experimental results?

Thanks in advance!
~ C.C.
1 Reply Last Post 10 mar 2020, 12:06 GMT-4
COMSOL Moderator

Hello Connor Campbell

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Jeff Hiller COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 10 mar 2020, 12:06 GMT-4

Hello Connor,

COMSOL recently added to our website this page which highlights well over a hundred verification and validation models and provides access to their documentation. Models can be filtered by discipline or by module, as well as searched through via a free word search. Filtering for the CFD Module, you will find these models.

This blog post describes how to verify mass and energy conservation in a model.

Best regards,

Jeff

-------------------
Jeff Hiller
Hello Connor, COMSOL recently added to our website [this page](https://www.comsol.com/verification-models) which highlights well over a hundred verification and validation models and provides access to their documentation. Models can be filtered by discipline or by module, as well as searched through via a free word search. Filtering for the CFD Module, you will find [these models](https://www.comsol.com/verification-models/cfd-module). [This blog post](https://www.comsol.com/blogs/how-to-calculate-mass-conservation-and-energy-balance/) describes how to verify mass and energy conservation in a model. Best regards, Jeff

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content