Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

3D simulation of waveguide with bragg grating

Please login with a confirmed email address before reporting spam

Hi,

I'm just starting with the 3D calculation. I'm interested in long-range plasmonic waveguide with bragg grating features.

I read some of tutorials about wave optics module and just follow them. And I have encounter with following problems.

1. I can simulate the propagation of light in plasmonic waveguide with the electromagnetic wave, beam envelop module, boundary mode analysis. But I cannot get same result with electromagnetic wave, frequency domain, boundary mode analysis.

2. When I put some grating feature with has different index or shape, then the Beam Envelop module dose not give some reliable result. The calculated field distribution is quite strange. Even I'm not sure that it could be calculated with the Beam Envelop module.

Could some one give me a advise with those problems? or recommend some materials about waveguide with grating?

Regards,
Choloong

0 Replies Last Post 22 ago 2014, 11:30 GMT-4
COMSOL Moderator

Hello Choloong Hahn

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.