Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Moving mesh model with contact angle define at the wall
Posted 23 set 2014, 04:16 GMT-4 Version 4.3 0 Replies
Please login with a confirmed email address before reporting spam
My problem is pretty easy. I have a rectangular box where half of the box is filled with liquid water and other half with air. and i have specified the contact angle at the walls so when i compute my interface should move to adjust the contact angle but i am not getting the answer and it shows " Failed to find consistent initial values".
I have done it in phase field model but as phase field has diffused interface thickness it does not give the correct result.
Please help me solve this problem.
Hello Puja Agarwala
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.