Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Three Electrodes:Is it possible to measure voltage, admittance, or impedance at each individually

Posted 18 mag 2010, 22:46 GMT-4 Version 3.5a 1 Reply

Eric Salm
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all, I'm having some trouble figuring out how to extract the information I would like from my simulation and hoping someone here would be able to help...

My simulation: I've got three electrodes which are being used to sense changes in media as insulating bodies pass above the electrodes.

The 3 electrode layout is: a port electrode, with forced voltage is centered. On either side of the port, there is a ground electrode.

My hope: I would like to compare the voltages, admittances, impedance, at each of the ground electrodes individually.

Is this possible within COMSOL?

Thanks for any help!
-Eric
1 Reply Last Post 23 giu 2011, 17:16 GMT-4
COMSOL Moderator

Hello Eric Salm

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Kirthika Nahalingam
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 23 giu 2011, 17:16 GMT-4
Hi Eric,

I am working on a similar problem as you with 4 electrodes. I am applying current on the outer 2 and want to measure the voltage between the inner 2 electrodes. I am using comsol 3.5a and seeking your help as you have worked on the similar issue.

Thanks,
Kirthika.



Hi all, I'm having some trouble figuring out how to extract the information I would like from my simulation and hoping someone here would be able to help...

My simulation: I've got three electrodes which are being used to sense changes in media as insulating bodies pass above the electrodes.

The 3 electrode layout is: a port electrode, with forced voltage is centered. On either side of the port, there is a ground electrode.

My hope: I would like to compare the voltages, admittances, impedance, at each of the ground electrodes individually.

Is this possible within COMSOL?

Thanks for any help!
-Eric


Hi Eric, I am working on a similar problem as you with 4 electrodes. I am applying current on the outer 2 and want to measure the voltage between the inner 2 electrodes. I am using comsol 3.5a and seeking your help as you have worked on the similar issue. Thanks, Kirthika. [QUOTE] Hi all, I'm having some trouble figuring out how to extract the information I would like from my simulation and hoping someone here would be able to help... My simulation: I've got three electrodes which are being used to sense changes in media as insulating bodies pass above the electrodes. The 3 electrode layout is: a port electrode, with forced voltage is centered. On either side of the port, there is a ground electrode. My hope: I would like to compare the voltages, admittances, impedance, at each of the ground electrodes individually. Is this possible within COMSOL? Thanks for any help! -Eric [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content