Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary Conditions in Solid Mechanics

Please login with a confirmed email address before reporting spam

In COMSOL 4.2a, I am generating shear waves in a spherical glass phantom having agar-agar inside by rotating it around an axis (z-axis). Glass is defined to the layer of this spherical agar-agar, it is not a different geometry. Agar-agar has another small stiffer inclusion inside but same material. Thus, in overall I have two spheres, one being small (radius=2cm) and inside the big one (radius= 7cm) and big one has a layer with thickness 2mm defined as glass material, big sphere is defined as agar-agar, small sphere is defined as stiffer agar-agar (greater Young's Modulus). I am generating the rotation about an axis by using prescribed displacement (domain) assigned to the outer shell (glass), equations defined in spherical coordinates (prescribed displacement in phi direction =0.01*sys2.r*sin(sys2.theta), prescribed displacement in r and theta directions are not defined) .

At the boundaries (glass and agar-agar, agar-agar and inclusion), how can I see the boundary conditions simulation has been using? At the boundaries, for instance displacement/pressure/velocity which one of them is continuous? Normal or tangential component? I am trying to make a similar analogy to EM waves in boundary conditions. Could someone help please about boundary conditions in Solid Mechanics Module?


0 Replies Last Post 16 feb 2015, 04:43 GMT-5
COMSOL Moderator

Hello Cemre Ariyurek

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.