Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

quality factor calculation in Squeezed-Film Gas Damping in an Accelerometer

Posted 13 mag 2015, 21:28 GMT-4 Version 4.3, Version 4.4 2 Replies

Chih-Yuan Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

I want to get the quality factor in the squeezed-Film accelerometer.

I have simulated a case in COMSOL example 【Squeezed-Film Gas Damping in an Accelerometer】.
In this case, the film-pressure have 1000Pa, 300Pa, and 50Pa. I can get the three different results in time domain, but i cannot get the different quality factor.


If somebody has ever solved my problem. It would be nice to share it in here. Thanks.
2 Replies Last Post 9 giu 2016, 04:05 GMT-4
Saoni Banerji
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 25 mag 2015, 12:18 GMT-4
I'm having the same issue in calculating quality factor of a squeezed-film gas damping in an accelerometer. I believe first we need to place a bottom electrode below the cantilever and apply the actuation force. However, the problem is that if I leave the space between the cantilever fixed to an end and bottom electrode empty, the structure will not be meshed. Could anyone please help me resolve this issue?

Also, excuse me for my ignorance as I have just started using the software.


Best Regards,
Saoni
I'm having the same issue in calculating quality factor of a squeezed-film gas damping in an accelerometer. I believe first we need to place a bottom electrode below the cantilever and apply the actuation force. However, the problem is that if I leave the space between the cantilever fixed to an end and bottom electrode empty, the structure will not be meshed. Could anyone please help me resolve this issue? Also, excuse me for my ignorance as I have just started using the software. Best Regards, Saoni
Vasudha Agrawal
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 9 giu 2016, 04:05 GMT-4
Hi,

can you please tell me how did you add squeezed film damping in your model?


Regards,
Vasudha Agrawal
Hi, can you please tell me how did you add squeezed film damping in your model? Regards, Vasudha Agrawal

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content