Process Control Using a PID Controller
Application ID: 866
This model shows how a flow model can be coupled to a process control mechanism.
Controlling application parameters according to other application parameters is important within process engineering. Most control mechanisms use the data at a wall or an outlet to control inlet parameters. More accurate control can occur if you can control inlet parameters due to data found within a component or piece of equipment.
This model couples mass transfer to fluid flow with two inlets (one controlled) and a PID controller. In this case, fluid flow is controlled according to the concentration at a point within the geometry - therefore a requirement for a physical model.
The model makes use of the PID Controller add-in to implement the PID control.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabella delle Funzionalità and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.