A Low-Pass and Band-Pass Filter Using Lumped Elements
Application ID: 15675
Passive devices can be designed using lumped element features if both the operating frequency of the device and the insertion loss of lumped elements are low. This example simulates two types of lumped element filters that are similar to lumped ports, except that they are strictly passive and there are predefined choices for inductances and capacitance.
First, a five-element maximally flat low-pass filter is built to compute frequency responses that show the cutoff at the intended frequency. The geometry of each element (surface-mount device, SMD) is simplified as a 2D boundary and the electrical performance is modeled using the Lumped Element boundary condition in the Electromagnetic Waves, Frequency Domain interface. Then, a band-pass filter transformed from the low-pass filter design is simulated in the same frequency range. Both filter models present the S-parameters and electric field distribution.
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Tabella delle Funzionalità and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.