Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Flow past a circular cylinder arises in many engineering applications, but there is significantly less work studying flow past a cylinder in a confined domain, such as pipe flow or flow in a plane channel. There are many applications where the scaling of a particular problem requires ... Per saperne di più
Printed circuit heat exchanger (PCHE) is a key component in many energy and power systems, such as concentrated solar power plant, nuclear power plant, aircraft, etc. In this paper, the thermal and fluid performance of a lab-scale PCHE is analyzed using COMSOL Multiphysics® simulation ... Per saperne di più
We here present a Computational Fluid Dynamics (CFD) model performed with COMSOL Multiphysics® simulation software as part of a collaboration with the Polarized Target Research Group at the University of New Hampshire (http://nuclear.unh.edu/research/polarized-target-lab/). By coupling ... Per saperne di più
Granular and powdered activated carbons have been widely used for purification/filtration in air and water as catalysts or organic adsorbents. To obtain mechanical filtration capacity and inorganic reduction performance, activated carbon can be formed as a block-shaped porous media, ... Per saperne di più
Due to particle interactions, magnetic particles suspended in non-magnetic fields tend to form chains, clusters or columns under magnetic fields. The non-spherical magnetic particles in the suspension show different rheological properties compared to spherical particles. In this paper, ... Per saperne di più
This study investigates the effect of a uniform magnetic field on the lateral migration behavior of a ferrofluid droplet in a plane Poiseuille flow at arbitrary directions by means of numerical simulation. A numerical scheme called level set method in combination with the laminar two ... Per saperne di più
Soil pipes are large contiguous macropores that exist in soils or geological materials. These macropore features generally serve as conduits for rapid movement of water through soils or geological material, and are generally oriented nearly parallel to the land surface. Soil pipes are ... Per saperne di più
Introduction: A small-scale supersonic wind tunnel can represent a convenient platform for supersonic flow testing. The scale considered in this work, with maximum cross-sectional area of 1”x1”, requires simpler structure in addition to the low budget costs and minor space ... Per saperne di più
A defining characteristic of atomic layer deposition (ALD) is the sequential exposure of a surface to self-limiting, saturating reactions. Temporal ALD operates through intermittent purge cycles, while spatial ALD relies on physical separation accomplished by delivering reactants through ... Per saperne di più
Some of the most common fluid-structure interaction (FSI) applications in biomedical research include blood flow in the veins and arteries. COMSOL Multiphysics® simulation software offers two main multiphysics schemes for FSI problems: partitioned (segregated) and monolithic (fully ... Per saperne di più