Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Pulsed DC technology has led to the design of cost-effective deposition systems and to improved film properties, compared to conventional rf systems. In this work, a two-dimensional finite element model is used to investigate the high frequency pulsed DC discharges in nitrogen. The study ... Per saperne di più
Small-scale plasma jets in atmospheric air can produce regions of highly reactive chemistry coincident with temperatures approaching room temperature allowing his type of cold plasma jet to be used for decontamination of surfaces and sterilization of living tissue. In the device under ... Per saperne di più
Standard approaches to reproduce the coupling of wave propagation and plasma transport inside a helicon plasma source rely on electromagnetic simulations coupled to either kinetic or particle-in-cell strategies to reproduce the plasma response. If the plasma density reach values higher ... Per saperne di più
Inductively Coupled Plasma Chemical Vapor Deposition (ICPCVD) has been widely used for carbon-based nanomaterial synthesis because it provides high plasma densities and uniform plasma distribution and allows plasma to be generated in room temperature.[1] During the ICPCVD process, the ... Per saperne di più
手性等离激元纳米结构被广泛研究并用于生物监测、分析化学和负折射率介质方面。在该结构中直接耦合的机制已经在相关研究中被发现。我们提出由金膜分隔两个金纳米棒(TNMF)的结构(图1)，并发现了间接耦合机制。 在 COMSOL Multiphysics® 中，射频电磁波，频域接口用于求解正弦时变电磁场分布，选此接口计算 TNMF 结构的光学响应。插值函数用来设置金的折射率；设置边界条件模拟周期性结构阵列。结果可通过端口2对端口1的响应获得，并可查看每个数据点的电场、电荷等分布。应用程序库中射频模块的“Plasmonic wire grating ... Per saperne di più
In our project, we propose an innovative software solution to the problem of electrical arcing risk prediction in high-voltage on-board electronic equipment intended for long-term self-contained use, e.g. in spacecraft conditions. It completely based on so-called “decomposition” approach ... Per saperne di più
High power CO2 lasers have been the workhorses for sheet metal cutting, welding and many more applications in materials processing during the past decades. Even though a significant replacement by fiber coupled lasers takes place, there are still many applications that benefit from the ... Per saperne di più
The lamination of substrates with thin coatings is commonly used in furniture, automotive and avionic industries. In the lamination process the hot melt adhesives are widely used and typically activated at temperatures from 80°C to 140°C by resistive heating. This requires a heat ... Per saperne di più
Plasma torches are used in processing of materials as well as in the energy industry for producing plasma. In a non-transferred arc plasma torch, an electric arc can be initiated by applying a direct current (DC) between the cathode and anode, both placed inside the torch. Then, the ... Per saperne di più
Fusion devices (tokamaks, stellarators) require hundreds of millions degree Celsius temperature to reach the plasma state when the fusion reactions start to occur. Ion cyclotron resonance heating (ICRH) is a method of energy transfer to the ions in the plasma from electromagnetic ... Per saperne di più