Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Introduction: The use of microwave energy for thermal cracking (from thermal stress and water pore pressure) of lignite-coal briquettes increases the lignite friability [1] and is beneficial for later chemical treatment inside a gasifier (for methanol production for example). An ... Per saperne di più
The unique optical properties of plasmon resonances in noble metal nanoparticles have been extensively investigated owing to their ability to enhance the electric field amplitude but also to tailor its spectral and spatial distribution. Among all application domains, nonlinear optics ... Per saperne di più
It is well-known that metal nanoparticles (NPs) excited at the plasmon frequency not only exhibit peculiar optical properties (e.g., a peak in the extinction spectrum, an enhanced electromagnetic near-filed) but also heat up [1]. This phenomenon is highly investigated for medical ... Per saperne di più
At the Fontys University of Applied Physics (The Netherlands) a plasma etcher has been acquired for educational purposes. The machine operates at low power up to 30 Watt and is driven with a magnetic coil at 13.56 MHz. The use of COMSOL Multiphysics software will be discussed to simulate ... Per saperne di più
There has been a growing interest in optical parametric amplifiers (OPA) for light generation and amplification in because of the possibility for arbitrary operation wavelength and wideband tenability [1]. PCFs are of particular interest in such nonlinear optics applications because of ... Per saperne di più
In this paper, we present a 2D axisymmetric self-consistent plasma fluid model for microwave plasmas operating in argon. The model was developed using COMSOL Multiphysics and its Plasma Module. Plasma, flow, heat and electromagnetic equations solved self-consistently. The effect of the ... Per saperne di più
In magnetically confined fusion devices, electron cyclotron resonance heating (80-170 GHz) is characterized by a local RF-power deposition at the electron cyclotron resonance [1]. A mm-wave RF Gaussian beam is launched from a dedicated antenna and propagates through the highly turbulent ... Per saperne di più
The design of ESS-Bilbao RFQ (RadioFrequency Quadrupole) linear accelerator cavity using COMSOL Multiphysics is presented. The work includes geometry definition, electrostatics, electromagnetic and thermomechanical coupled simulations. The main part of the work corresponds to the ... Per saperne di più
The Multiphysics design of a 130 GHz klystron Buncher cavity is described in this paper. In this high frequency range, dimensions are critical and expose the device to multiple physics effects, due to the power dissipations, affecting the electromagnetic performances. The proposed device ... Per saperne di più
Parallelization of droplet microfluidics is a challenging task because of the complex fluid mechanics coupling between parallel devices. Failure of few droplet generators can influence the size distribution of the final product and the correct operation of the neighbor devices. One of ... Per saperne di più