Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
An Ion Mobility Spectrometer is a device to analyze different components of a gas mixture. A feature of this technology is the ultra-low detection limit which can be obtained for most trace gases. Due to a limited resolution which is needed to differ between different components an ... Per saperne di più
In this work, a 2D dynamic simulation for a portion of metal hydride based hydrogen storage tank was performed using computational software COMSOL 4.0a Multiphysics. The software is used to simulate the diffusion and heating of hydrogen in both radial and axial directions. The model ... Per saperne di più
In this paper a two dimensional time dependent model is developed and assessed to describe the interrelated processes of conduction, convective heating and ablation of non pyrolytic ablative material. An aerothermochemical analysis for the process of non-pyrolitic composite material ... Per saperne di più
A multiphase porous media model involving heat and mass transfer within a potato chip was implemented in COMSOL 3.5a. The diffusive flux in oil and liquid water was modeled from capillary driven flow while the gas phase was modeled using binary diffusion. A non-equilibrium water ... Per saperne di più
In this work we have constructed a 2D COMSOL model for the drying of Latex. It is based on a prior 1D model of Kiil, but also includes the effects of a flowing air stream, which is necessary to remove the evaporated water vapor. The model illustrates several features of drying that are ... Per saperne di più
The objective of this study is to numerically evaluate the effectiveness of an energy recovery ventilator (ERV) during the summer and winter seasons. The energy recovery ventilator allows heat and mass transfer between two air streams separated by a membrane. The effects of varying the ... Per saperne di più
Rick has a BS in Physics, a ScM in Geological Sciences, and a PhD in Physics. He worked at Air Force Geophysics Laboratory, Conoco Petroleum Exploration Research, and, since 1989, has been at the DuPont Experimental Station. In this industrial setting, Rick has had opportunity to work on ... Per saperne di più
This presentation shows a numerical simulation model of the chemical leachate process from construction byproducts and the chemical transport process with geochemical reactions for their environmental safety evaluation. Per saperne di più
COMSOL Multiphysics is a very helpful simulation software in our researches on both PEMFC and nanometer-sized electrodes. In the first part of our presentation, the influence of humidity and temperature to the performance of PEMFC are studied by simulating the MEA (membrane electrode ... Per saperne di più
We studied the transient characteristics of PEMFC and water transport during PEMFC start-up, concerning the following aspects: Effect of air stoichiometry change on transient behavior of PEMFC, Transient behavior of water transport during PEMFC start-up, and high temperature PEMFC ... Per saperne di più