Menu

Discussion Forum

New Discussion
Filtra

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Comsol with Matlab: How to save data

Posted 1 set 2011, 09:55 GMT-4 5 Replies

Jiaming Hao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I use Comsol (v3.5a) with matlab to do frequency sweep. The results (for example, S-parameters, S11) can be plotted in Matlab paint window using some postplot commands. But I would like to save the data in a file and plot them using other software like OrignPro. I try many times but couldn't fix it. As you know, if the results are plotted in Comsol paint window, they could be saved in a ASCII file. But in Matlab paint window, we cannot do that.
5 Replies Last Post 7 set 2011, 04:46 GMT-4
Jiaming Hao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 5 set 2011, 10:11 GMT-4
Does there anyone know how to fix this? Thank you very much in advance!

Does there anyone know how to fix this? Thank you very much in advance!
Rafal Piotuch
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 set 2011, 04:41 GMT-4
Hi, I think that after solving a problem data is already saved in a fem. In my opinion you should check the Matlab Interface Guide for the proper syntax.

Hoping this helps, Rafał Piotuch.
Hi, I think that after solving a problem data is already saved in a fem. In my opinion you should check the Matlab Interface Guide for the proper syntax. Hoping this helps, Rafał Piotuch.
Jiaming Hao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 set 2011, 06:46 GMT-4
Hi, Rafal,

Thank you so much for your reply. I was really try to do that, but could not find such corresponding syntax. Anyway, I would try again. Thanks.

Best regards,


Hi, I think that after solving a problem data is already saved in a fem. In my opinion you should check the Matlab Interface Guide for the proper syntax.

Hoping this helps, Rafał Piotuch.


Hi, Rafal, Thank you so much for your reply. I was really try to do that, but could not find such corresponding syntax. Anyway, I would try again. Thanks. Best regards, [QUOTE] Hi, I think that after solving a problem data is already saved in a fem. In my opinion you should check the Matlab Interface Guide for the proper syntax. Hoping this helps, Rafał Piotuch. [/QUOTE]
Rafal Piotuch
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 set 2011, 01:50 GMT-4
Hi - I have found it:
www.comsol.com/community/forums/3-5a/thread/20292/

Best regards,
RP
Hi - I have found it: http://www.comsol.com/community/forums/3-5a/thread/20292/ Best regards, RP
Jiaming Hao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 7 set 2011, 04:46 GMT-4
Thank you so much for your nice reply. I just found an alternative solution for my case. I attached my sample code here also.
------------------------------------------------------
S21 = [ ];

data = postglobaleval(fem,{'S21_rfwh'});
Frequency = data.x;
S21 = cat(2,S21, data.y);
-------------------------------------------------------

Here, S21 is S-parameters, it could be also any globally defined expression.



Hi - I have found it:
www.comsol.com/community/forums/3-5a/thread/20292/

Best regards,
RP


Thank you so much for your nice reply. I just found an alternative solution for my case. I attached my sample code here also. ------------------------------------------------------ S21 = [ ]; data = postglobaleval(fem,{'S21_rfwh'}); Frequency = data.x; S21 = cat(2,S21, data.y); ------------------------------------------------------- Here, S21 is S-parameters, it could be also any globally defined expression. [QUOTE] Hi - I have found it: http://www.comsol.com/community/forums/3-5a/thread/20292/ Best regards, RP [/QUOTE]

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content