Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Moving mesh- When to use?

Posted 6 gen 2012, 02:23 GMT-5 Structural Mechanics Version 3.5a 2 Replies

Somayyeh Poshtiban
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I have a very basic question ... Can anybody help me to understand when we actually need Moving mesh?
I have read many discussions, but I still don't know whether I need it for my simulations or not.

I am trying to simulate the effect of mass loading on resonant frequency of cantilever.

I appreciate any help.

Thanks,
Som
2 Replies Last Post 6 gen 2012, 02:42 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 gen 2012, 02:31 GMT-5
Hi

A ALE moving mesh is typically used in fluid flow, when you interact with a solid that deforms over large distances, or if you change the geometrical shape of your model via mesh deformations.

But if you are in plain "solid", even if you cantilever deforms greatly (if so turn on large deformations, but it makes the model non-linear and longer to solve), you do normally not need ALE meshing

--
Good luck
Ivar
Hi A ALE moving mesh is typically used in fluid flow, when you interact with a solid that deforms over large distances, or if you change the geometrical shape of your model via mesh deformations. But if you are in plain "solid", even if you cantilever deforms greatly (if so turn on large deformations, but it makes the model non-linear and longer to solve), you do normally not need ALE meshing -- Good luck Ivar
Somayyeh Poshtiban
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 6 gen 2012, 02:42 GMT-5
Hi Ivar,

Thanks so much for the reply.

Som
Hi Ivar, Thanks so much for the reply. Som

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content