Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

radiaton problem

Posted 18 gen 2012, 11:21 GMT-5 Heat Transfer & Phase Change Version 4.2a 2 Replies

Toru Okada
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I have a problem simulating a geometry where the heat transfer mechanisms are both convection and radiation.
When I am simulating the problem using only convection, it runns really fast and the results are good. When I add the radiation mechanism, it cannot reach a convergence and it runs forever. I am using the "Surface-to-Ambient Radiation" module.

Any suggestions?

Thanks!
2 Replies Last Post 19 gen 2012, 13:17 GMT-5
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 gen 2012, 00:07 GMT-5
Radiation heat transfer is proportional to T^4 so it’s more nonlinear than convection. Still it should work. Check the ambient temperature and the emissivity.

Nagi Elabbasi
Veryst Engineering
Radiation heat transfer is proportional to T^4 so it’s more nonlinear than convection. Still it should work. Check the ambient temperature and the emissivity. Nagi Elabbasi Veryst Engineering
Toru Okada
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 19 gen 2012, 13:17 GMT-5
Thanks for the answer!
I think i have to try interfering in the solver because of the non-lineariaty of the problem.
Thanks for the answer! I think i have to try interfering in the solver because of the non-lineariaty of the problem.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content