Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

DC coil parametres configuration.

Posted 27 feb 2012, 09:24 GMT-5 Low-Frequency Electromagnetics Version 4.1 1 Reply

Joao Vicente Goncalves Rocha
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

Normally when working with coils, I just set up a ring, and then using the area, number of turns and current, I calculate J and add a External Current Density in the model.

Now I have a problem, that needs some DC parametres, like:

-Isolated DC coil inductance, L0;
-Isolated coil resistance, R0;

I searched how to build this in my model, but i couldn't find anywhere.

I would apreciate some sugestions in this.

Thanks for your time!

CYA.

Joao Rocha
1 Reply Last Post 27 feb 2012, 10:34 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 27 feb 2012, 10:34 GMT-5
Hi

if you are in 2D or 2D-axi mode you have the advanced coil BC's (I do believe they where there already in v4.1) that allows you to get a better coil representing by defining turns and coil wire etc in teh BC directly, and the BC calculates the voltage current taking all this into account

--
Good luck
Ivar
Hi if you are in 2D or 2D-axi mode you have the advanced coil BC's (I do believe they where there already in v4.1) that allows you to get a better coil representing by defining turns and coil wire etc in teh BC directly, and the BC calculates the voltage current taking all this into account -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content