Menu

Discussion Forum

New Discussion
Filtra

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

parasitic capacitance

Posted 31 gen 2013, 02:28 GMT-5 Low-Frequency Electromagnetics Version 4.2a 1 Reply

Sunil Chaluvaiah
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

hi,
i m designing a capacitive comb drive accelerometer in this i want to take parasitic capacitance in to account in order to find capacitance but i cant find where it is...could you please help me out
1 Reply Last Post 31 gen 2013, 04:19 GMT-5
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 31 gen 2013, 04:19 GMT-5
Hi

but how can COMSOL decide what is "nominal" and what is "parasitic" capacitance ? you need to define your surfaces for the "nominal" value and integrate, and then look at the ratio with the full capacitance given by COMSOL. Check the internal equations to see how COMSOL estimates the capacitance, or read some of the model library examples

--
Good luck
Ivar
Hi but how can COMSOL decide what is "nominal" and what is "parasitic" capacitance ? you need to define your surfaces for the "nominal" value and integrate, and then look at the ratio with the full capacitance given by COMSOL. Check the internal equations to see how COMSOL estimates the capacitance, or read some of the model library examples -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content