Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Heat flux continuity
Posted 6 nov 2013, 09:43 GMT-5 Heat Transfer & Phase Change Version 4.3b 0 Replies
Please login with a confirmed email address before reporting spam
I have a problem with a Heat Transfer study.
I have a heat flux outgoing from the internal surface of external cylinder and I would that this flux enter to external surface of internal cylinder.
I attached the geometry of my problem.
This flux in practice is a radiative heat flux but I don't have the heat transfer module with surface-to-surface radiation. I calculated a radiative coefficient so I can use heat flux equation.
So, what kind of condition should I impose to external surface of internal cylinder?
Thanks a lot
Attachments:
Hello Dario Bernardi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.