Scopri come la simulazione multifisica viene utilizzata per ricerca e sviluppo
In questa sezione troverete i lavori presentati alle Conferenze mondiali COMSOL. Le presentazioni descrivono ricerche e prodotti innovativi progettati con COMSOL Multiphysics da colleghi di tutto il mondo. I temi delle ricerche presentate abbracciano un'ampia gamma di settori produttivi e aree applicative, in ambito elettrico, meccanico, fluidodinamico e chimico. Lo strumento di Ricerca Rapida vi permetterà di trovare le presentazioni che si riferiscono all'area di vostro interesse.
Visualizza gli articoli presentati alla COMSOL Conference 2020
Thermoelectric generators (TEG) use Seebeck’s effect to directly convert heat into electricity. TEG represent, therefore, a promising option for energy harvesting of waste heat, for example in car exhaust systems. To investigate the dynamic behavior of high temperature TEG, a test ... Per saperne di più
The Ray Tracing Module in COMSOL Multiphysics® is used to setup and simulate a lens and compare the longitudinal spherical aberration (LSA) with the third order theory in optics. Some Seidel coefficients will be investigated and the geometry or solver settings will be discussed. Also a ... Per saperne di più
A time-dependent study was conducted using COMSOL Multiphysics® (Conjugate Heat Transfer interface and Heat Transfer with Phase Change feature) for the numerical investigation of the thermal performance of novel Phase Change Material (PCM)-enhanced plasters for their incorporation in ... Per saperne di più
Highly loaded lubricated machine elements such as gears or camshafts are an integral part in a wide variety of technical products. Due to higher efficiency requirements these machine elements have to be improved continuously, which leads to the necessity to investigate physical ... Per saperne di più
Microwave discharges have a wide range of applications, such as gas conversion, material processing and surface treatment; also they can provide an efficient way for dissociation of molecular gases as CO2 and N2O. Depending on the operating pressure and temperature, non-equilibrium ... Per saperne di più
Pervaporation is the selective evaporation of one component in a liquid mixture using a membrane. HybSi pervaporation membranes consist of porous ceramic support tubes with a thin selective layer on the inside or feed side. Modules for 7 and 19 membrane bundles (surface area up to 2.0 ... Per saperne di più
As known, air quality in urban areas is dramatically affected in particular by the noteworthy presence of respirable suspended particulate matter (such as PM2.5), nitrogen oxides (NOx), carbon monoxide (CO) and hydrocarbons (HC), which are mainly due to traffic-induced emissions. On the ... Per saperne di più
Electromagnetic and thermal simulations are achieved using COMSOL Multiphysics® with 2D axisymmetrical finite–element method for a percutaneous microwave hyperthermia system with ex–vivo experiments on different biological tissues. Temperature variation and distribution are studied in ... Per saperne di più
Successive studies on graphene, reactive-edge graphene, and pore functionalized graphene were conducted throughout the use of the extended capabilities of COMSOL Multiphysics® modules, modeling and simulating the activation of functionalized building-blocks made of graphene and C- ... Per saperne di più
We describe the thermal modeling of a crate hosting boards with Associative Memories (AM) designed for the Fast Tracker Trigger (FTK) system of the ATLAS detector at the CERN Large Hadron Collider. FTK is a highly paralleled hardware system designed to provide global tracks reconstructed ... Per saperne di più